提高開關電源可靠性電路的研究
作者:徐張英 龔祖華 韓朋樂 上傳時間:2013/4/14 15:28:56
摘要:本文介紹了一種蓄電池充電開關電源,重點研究了其中軟啟動的設計,硬件消除開關機電路抖動干擾設計,輸入、輸出過流保護等提高開關電源可靠性的電路方案。通過設計了幾種保護電路,不僅很好地提高了蓄電池充電電源的可靠性,還在一定范圍內提高充電電源的效率。文章最后通過兩款可快速對24V/300Ah 蓄電池充電的開關電源樣機實驗進行了驗證。
敘詞:開關電源,開關機抖動,保護電路,可靠性,軟啟動
Abstract:This paper introduces a switching power supply for storage battery, focusing on the design of the soft-start, hardware circuit toeliminate the ON OFF jitter interference, input, output overcurrent protection. Its not only a good way to improve the reliability of thebattery charging power supply, but also a good way to improve the charging efficiency of the power within a certain range. Finally, it wasverified through prototype experiments of two switching power supplies for 24V/300Ah battery charging.
Keyword:Switch-mode power supplies, ON OFF Jitter, Protection circuit, Reliability, Soft-start
說明:本站會員正確輸入用戶名和密碼進行登錄系統后才能查看文章詳細內容和參與評論。
--本文摘自《電源世界》,已被閱讀129456次
免責聲明:本文僅代表作者個人觀點,與電源在線網無關。其原創性以及文中陳述文字和內容未經本站證實,對本文以及其中全部或者部分內容、文字的真實性、完整性、及時性本站不作任何保證或承諾,請讀者僅作參考,并請自行核實相關內容。
關于本文的網友評論:
本文暫時還沒有網友發表評論信息!