LED電源測試系統
地區城市：廣東省－深圳 更新時間：2011-3-18 17:53:53
聯 系 人：許先生 有效期限：2012-3-18 14:58:29
公司名稱：深圳市新能基科技有限公司
電子信箱：apex_xu@163.com 聯系電話：13377782881
|
ATC1500-S適用于電源廠生產線測試使用. |
|
測試速度快，同時可迅速形成測試報表， |
|
有效的提高了工廠的品質控制能力。 |
|
|
ATC1500-S
LED驅動電源自動系統
介 紹
適用：150W以下單路輸出之充電器，電源適配器，LED驅動電源！
（客戶自備電腦+顯示器）
概述：
系統結構：測試架+ATC150主機（內含 150W電子負載，功率計模塊，示波器模塊，AC源）
尺寸：500x450x133mm 總體重量：20KG
主要功能特點：
1.可以測試150W以內任何單組輸出電源
2.圖形界面基于Windows XP環境
3.測試程序編輯功能
4.測試項目選擇功能（輸入/輸出/空載/短路
5.欠壓/穩壓/過載/紋波/效率等功能）
6.統計測試報告（Excel電子檔）
7.自動生成CPK等品質報表
8.配置靈活
9.性價比高，適合大中小企業。
10.測試速度快
11.測試不良結果實時打印功能
測試項目：
啟動測試(Start-up)
欠壓測試(UVLO)
待機測試(Idle)
恒壓區測試(Standard CV)
恒流區測試(Standard CC)
LED驅動電源測試（LED）
短路測試(Short Circuit)
過壓測試(Over Voltage)
過流測試(Over Current)
線調整(Line Regulation)
負載調整(Load Regulation)
關機測試(Power Down)
支持性測試(Support Function)
|
Test Name |
Parameter and Range(測試項目與量程) |
Accuracy |
|
START UP 啟動測試 |
Inrush current: 0 – 83Apk Startup time: 0 to 32767msec. Output voltage overshoot: 0 – 60Vpk |
±1% (reading + range) ±1ms ±1% (reading + range) |
|
UVLO欠壓測試 |
Functional test only, Pass/Fail |
N/A |
|
IDLE待機測試 |
Standby input power: 0 – 5/25/250/1250W Standby input current: 0 – 0.1/0.5/5/25Apk Input voltage: 30 – 280V*Note 2 |
±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) |
|
STANDARD CV (Constant Current and Constant Resistance load) 恒流 |
CC Mode: 0 – 3/15 A CR Mode: 0.1 – 50Ohm Input Voltage: 30 – 300Vrms *Note 1 Input Current: 0 – 0.1/0.5/5/25Apk Input Power: 0 – 5/25/250/1250W Power Factor 0 – 1.0 Output Voltage 0 – 15/60Vdc Output Current 0 – 3/15Adc Efficiency: 0 – 100% Ripple/Noise 200kHz: 0 – 500mV Ripple/Noise 20MHz: 0 – 500mV |
±0.15% (setting + range) ±0.3% (setting + range) *Note 2 ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.05% (reading + range) ±0.1% (reading + range) ±0.25% (reading + range) ±2% (reading + 5mV) ±2% (reading + 5mV) |
|
STANDARD CC (Constant Voltage and Constant Resistance load)恒壓 |
CV Mode: 0 – 15/60V CR Mode: 0.1 – 50Ohm Input voltage: 30 – 300Vrms *Note 1 Input Current: 0 – 0.1/0.5/5/25Apk Input Power: 0 – 5/25/250/1250W Power Factor 0 – 1.0 Output Voltage 0 – 15/60Vdc Output Current 0 – 15Adc Efficiency: 0 – 100% |
±0.15% (setting + range) ±0.3% (setting + range) *Note 3 ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.05% (reading + range) ±0.1% (reading + range) ±0.25% (reading + range) |
|
LED Driver Test (LED Load) LED驅動 |
Input voltage: 30 – 300 Vrms *Note 1 Input Current: 0 – 5/25Apk Input Power: 0 – 250/1250W Power Factor 0 – 1.0 Output Average Current reading: 0 – 15Adc Output Average Voltage reading: 0 – 60Vdc Output pulsed current reading (TRIAC, PWM) |
±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.1% (reading + range) *Note 4 ±0.05% (reading + range) *Note 4 ±0.5% (reading + range) |
|
SHORT CIRCUIT
短路測試 |
Input voltage: 30 – 300 Vrms *Note 1 Input Current: 0 – 5/25Apk Input Power: 0 – 250/1250W Power Factor 0 – 1.0 Output Average Current: 0 – 15Adc |
±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.2% (reading + range) ±0.2% (reading + range) *Note 4 |
|
OVER CURRENT 過流 |
Current trip point: 0 – 3/15Adc Trip point voltage: 0 – 15/60Vdc Wait Time >= 10msec. Wait Time < 10msec. Voltage Before Trip Point: 0 – 15/60Vdc Current Before Trip Point: 0 – 3/15Adc |
±0.1% (reading + range)
±0.05% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) ±0.1% (reading + range) |
|
OVER VOLTAGE 過壓測試 |
OV trip point: 0 – 60V |
±0.1% (reading + range) |
|
LINE REGULATION 線性調整率 |
Voltage regulation: 0 – 100% |
±0.1% (reading + range) |
|
LOAD REGULATION 負載負整率 |
Voltage regulation: 0 – 100% |
±0.1% (reading + range) |
|
AVERAGE EFFICIENCY 平均效率 |
Efficiency: 0 – 100% |
±0.25% (reading + range) |
|
I-V CURVE PLOT I-V曲線 |
CC Mode: 0 – 3/15 A CC Mode Output Voltage 0 – 15/60Vdc CC Mode Output Current 0 – 3/15Adc CV Mode: 0 – 15/60V CV Mode Output Voltage 0 – 15/60Vdc CV Mode Output Current 0 – 15Adc |
±0.15% (setting + range) ±0.05% (reading + range) ±0.1% (reading + range) ±0.15% (setting + range) ±0.05% (reading + range) ±0.1% (reading + range) |
|
POWER DOWN 關機測試 |
Holdup time: 0 – 65535 msec. Input voltage: 30 – 300Vrms *Note 1 Output Current 0 – 3/15Adc Output voltage overshoot: 0 – 60Vpk |
±1ms ±0.1% (reading + range) ±0.1% (reading + range) ±1% (reading + range) |
|
Global Setting |
Load On Voltage: 0 – 60Vdc Wait Time: 0 – 32767msec. Nominal Output Voltage: 0 – 60Vdc Nominal Output Current: 0 – 15Adc |
±1% (reading + range) ±1ms ±1% (reading + range) ±1% (reading + range) |
|
Optional Setting 支持性功能 |
Bias Output Voltage : 0 – 28Vdc Relay State rated current: 3A |
±0.2% (reading + range) - |
STS帶給企業的優勢
1.能有效地解決電源產品的功能測試，有效的排除了手工測試產生錯誤的可能性！
2.能將測試數據完整地形成電子表格，永久存檔以便追溯。
3.有效地降低測試成本，為客戶贏取更多訂單！
企業商務庫
